1, extrusion honing machine: used to clamp parts and fixed to a predetermined position, apply squeezing pressure on the grinding abrasive. Extrusion honing machine has two opposed abrasive cylinder, closed clamping parts or fixtures, the abrasive grinding pushed from one cylinder to another cylinder, parts of the site are constrained to produce abrasive, good trip through the pre-adjusted honing position and I set the number of parts polishing, pour Park corner. Extrusion Honingmachine is simple, convenient adjustment, multi-function, etc..
2, grinding Abrasive: used to produce machine parts to be passed to the extrusion pressure polishing, deburring inverted rounded corners on the surface, and through the movement of parts for abrasive polishing. Abrasive grinding abrasive indicators include viscosity, abrasive type and particle size. Abrasive grinding can be divided according to the viscosity D, DZ, ZG, G abrasives different viscosity. Because different viscosity abrasive flow generated can be divided into light integer (ie polished type), inverted angle-park, light integer abrasive.
3, honing machine fixture: for the workpiece fixed to a predetermined position, and guiding the abrasive flow on the specified channel, and thus the work surface polishing or inverted rounded corners. In small batch production jig is usually quite simple, once in mass production should be designed several of the workpiece clamping fixture. Fixture materials: aluminum alloy, cold rail steel and non-metallic materials nylon.
4, the workpiece cleaning: abrasive media itself as a strong cohesion, an objective which has non-stick properties of the metal. After machining, the workpiece can be easily hand stripped down 98 abrasive. These are stripped down to close up the abrasive for reuse, residual abrasive ultrasonic vibration or compressed air or gas can be cleaned Ex.