1, the operator must be familiar with the order and the performance of the machine operator, non-super performance using the device. 2 should be checked before starting the handle and stroke iron block is intact, tightening travel switch screws. Before starting lubricants, filling equipment lubrication chart should be prescribed.diamond cutting discs Start lubricating oil pump, night pump motor, examine and adjust the the night pressure system pressure, the pressure of the lubrication system, and hand turn
Rotating the dynamic wheel shaft, check whether light; jog wheelhead infeed, check the wheel with diamond pen, the workpiece relative
Position; workbench reciprocating 15-20 minutes, discharge the fuel tank in the air to eliminate crawling, and then adjust the itinerary and
Speed. 5, regular checks of the grinding wheel for cracks, non adapted used for face grinding. 6, reasonable selection of the amount of grinding, grinding wheel from the workpiece, shall not cease operation.dressing roller 7, prohibits the shield processing prohibited beat the workpiece at the top or countertops. Prohibit the use of the wheel and blunt diamond crack. 9, at work, to be adjusted according to the size of the workpiece feed position and workbench each butt. 10, working first check rail lubrication, lubrication fully before production. 11, regularly check the tightness of the workpiece spindle belt, timely adjustment. 12 replacement wheel must be checked for cracks, and then installed trimmed after the balance second balance commissioning normal
Before use. 13, the stop before the first reset, the closed cooling nozzle for 2-3 minutes, turn off the the grinding motor workpiece motor, until the grinding head stop
, Close the hydraulic pumps, lubricating oil pump, cooling pump. 14, after the work is completed, should be wiped off equipment, cut off the power, well point inspection card records.
Vitrified bond CBN wheel grinding power, high-speed processing does not burn the workpiece can be corrected and durable.Hone Tools
Is the best high-speed, efficient and high-precision grinding tools. Cubic boron nitride (CBN) wheel products suitable for processing a variety of material: (1) high manganese steel; ② high chromium, nickel, molybdenum alloy
James Bond; ③ chilled cast iron (HS80 90); ④ of hardened steel (HRC55 ~~ 65); ⑤ various cast iron (HB200
To 400), and has been in the domestic auto (gear, flywheel, shaft, bearings and other processing), roll, slurry pumps (impeller
, The vortex shell, shield, sheath processing), mold, cylinder liner; the ⑥ glass, gems, high hardness soft and tough material to solvediamond cutting discs
All walks of life difficult to machine materials of high hardness cutting, and can improve work efficiency, substantial saving processing
Hours of labor and electricity, access to the huge economic benefits.