Double disc grinding prototype
2013-08-29 by seoer3
Double Disc Grinding prototype samples for spectral analysis rough finish, for metallurgy, forging, casting and other coarse and fine specimen surface grinding and polishing. The machine is simple, safe and reliable. Disc with the same diameter on both sides, can be operated simultaneously, the work can also be a single disk. In order to meet environmental requirements, particularly with a vacuum device that uses no dust pollution, protect the health of operators, simple replacement wheel convenient no dust and noise characteristics of the spectrum before polishing the ideal equipment.
Technical parameters:
1 disc diameter: Ф400
2, disc: 2 (double disk)
3, the disc speed: fast disk 2850 rev / min; slow disk 1450 / min.
4, grinding speed: fast disk 25-60 m / sec; slow disk 12.6-30 m / s.
5, the motor: Y90S-2-1.5KW, Y90S-4-1.1KW.
6, the fan (centrifugal): φ200 mm impeller, shaft direct drive mode.
7, Control Type: buttons, switches; (disc button control) (blower switch control)
8 Dimensions: Length 1000 × width 500 × height 800 (mm)
9, Weight: 200 kg