Discussion on ordinary honing process
2013-01-21 by seoer1
Ordinary honing used on early 1920, Diamond Cutting Blade the size of the hole is generally 5-500mm, the length of the hole
Degree and the diameter ratio of up to more than 10 [8], are widely used, for example, the cylinder bore of the engine, the hydraulic cylinder of the cylinder hole and so need
To go through the honing process. Ordinary honing is the way of the mechanical movement of strip abrasive machining the inner and outer cylindrical surfaces, the plane
Methods. Said honing means the inner circle of dressing roller, it has been boring, milling plus
Work surface, requiring high efficiency to improve its roundness, cylindricity and surface quality developed a precision machining square
Method. Honing machining is grinding of special form is a part of the finishing process, and is a high efficiency
Processing methods, in order to correct the size of the workpiece to be processed, shape and surface quality, the use of installed in the honing head honing oil
Stone and the surface to be machined to keep a certain surface contact each other with a certain pressure, the two standard (the inner hole machining is
Rotating and reciprocating) motion for cutting.